ค้นหาสินค้า
บริการ
-
Multimeter
-
LCRMeter
-
Spectrum Analyzer
-
Oscilloscope
-
Vector Network Analyzer
-
Function generator
-
Audio Signal Generator
-
Frequency counter
-
RLC Dc Decade Resistance Box
-
Programmable electronic
-
Slide Voltage
-
Lab power supply
-
Clamp on meter
-
Power Analyser
-
Ultrasonic Flow Meter
-
Earth and Soil resistivity
-
Insulation tester
-
milliohm and microohm resistance tester
-
Impulse Winding Tester
-
Safety Tester/Hipot Tester
-
Tachometer Stoboscope
-
Vibration Meter
-
Anemometer
-
Sound meter
-
Lux meter
-
Water Quality Meter
-
Air Environment
-
Hygrometer Thermometer
-
Multifunction / Installation Tester
-
RF Spectrum Analyzer
-
Thermal Image camera
-
Infrared thermometer
-
EMF Spectrum Analyzer
-
Solar cell & Photovoltaic system
-
Calibrator
-
Battery Tester
-
High Voltage Hotline Tools
-
Miscellaneous Meter
-
Trainer Laboratory
-
Transformer Turns Ratio Meter
-
Insulation Oil Tester
-
Accessories
สมัครงาน
ลิ้งก์ภาพ
TH2817B/TH2817C แอลซีอาร์มิเตอร์, 100KHz
ข้อมูลสินค้า
-
รหัสสินค้า
TH2817
-
เข้าชม
2,542 ครั้ง
ยี่ห้อ
TONGHUI
รุ่น
TH2817B TH2817C
-
แก้ไขล่าสุดเมื่อ
30/04/2019 15:54
-
รายละเอียดสินค้า
TH2817B/TH2817C LCR meter, Signal frequency 100KHz
Brief Introduction • TH2817B/TH2817C LCR meter is newly-developed component measurement instrument providing high performance at low cost. It is perfect combination of general LCR meter and high-performance LCR meter with high-accuracy. The meter provides measurement speed up to 20times/second, 10 measurement frequencies from 50Hz to 100kHz, 3 common typical test levels, 5-digit resolution, two innersource resistance selections and strong measurement functions. So it’s suitable for measurement of quality control on production line, incoming inspection, component design and evaluation. High performance at low cost • With the base of our years’ experience of developing LCR meter, the meter reasonably combines easy operation and strong functions, and improves performance of 100kHz LCR meter. It is ideal instrument for incoming inspection and production line use. Communication interfaces • TH2817B/TH2817C provides HANDLER, RS232C, GPIB interfaces, through which the meter can communicate with computer and build automatic measurement system and product test line. Convenient parameter saving and loading • TH2817B/TH2817C can save 10 sets of measurement parameters, and automatically load saved parameters, which doesn’t have the trouble of repeat setting. Useful transformer measurement function • TH2817C has transformer measurement function. Using special transformer test fixture, turns ratio (N, 1/N), mutual inductance (M), primary and secondary inductances (L2A, L2B), primary and secondary DC resistances (DCR, R2) can be measured without changing test cable mode. With adjustable bias voltage from -5V to +5V or DC bias current up to 150mA, the meter can conveniently measure communication transformer and choke with small power. Specifications Measurement function TH2817B TH2817C Measurement LCR |Z|, R,X,G,B,C, L, Q,D, θ(deg),θ(red) parameter Transformer ------ DCR, M, N, 1/N, L2, DCR2 Basic accuracy 0.10% Equivalents circuit Series, parallel Mathematical function Absolute value deviation, Δ% Ranging mode Auto, Hold, Manual selection Trigger mode Internal, Manual, External, BUS Measurement speed Fast: 20, Med: 8, Slow: 2 (times/second) (≥1kHz) Average times 1-99 Calibration function Open/Short frequency point, full frequency correction Measurement terminal 5-terminal Display mode Direct, Δ, Δ% Display 5-digit resolution, special LCD display with backlight Measurement signal Signal frequency 10 points: 50Hz, 60Hz, 100Hz, 120Hz, 1kHz, 10kHz, 20kHz, 40kHz, 50kHz, 100kHz 30Ω, 100Ω 0.1Vrms, 0.3Vrms, 1Vrms ------ Fixed ±2VDC, 0~±5VDC adjustable 0~±50mA DC adjustable Measurement display range |Z|, R, X 0.0001Ω - 99.999MΩ C 0.001pF - 9999.9μ F L 0.001μH - 99.999kH D 0.0001 - 9.9999 Q 0.0001 - 9999.9 θ (DEG) -179.99º - 179.99 º θ (RAD) -3.1415 - 3.1415 Δ% -99.999% - 999.99% N,1/N ------ 0.001 - 999.99 DCR ------ 0.1mΩ - 199.99kΩ M,L2 ------ 0.001μH - 99.99kH Comparator and interface Comparator 5 bins (3 PASS bins, 1 FAIL bin), 1 AUX bin Memory 10 sets of inner instrument settings saved and recalled Interface RS-232C, HANDLER, GPIB (option) General Specifications Operating temperature & Humidity 0°C - 40°C, ≤90%RH Power supply 198V - 242V, 47.5Hz - 52.5Hz Power consumption ≤ 30VA Dimensions (W×H×D) 275mmx120mmx425mm Weight Approx. 3.8 kg Ordering Information TH2817B LCR Meter TH2817C LCR Meter Instrument Accessories TH26005A 4-terminal test fixture TH26011A 4-terminal Kelvin test cable TH26010 Gilded shorting plate TH26038 transformer test fixture (only for TH2817C) Options TH26047 4-terminal test fixture TH26048 4-terminal test fixture TH26005B 4-terminal test fixture TH26006 axial component test fixture (used with TH26005A) TH26007A core test fixture TH26008A SMD component test fixture TH26009B SMD test tweezers TH26029B SMD test tweezers TH10001 GPIB interface
Tags : แอลซีอาร์มิเตอร์ , เครื่องมืวัด , TH2817 , TONGHUI , LCR meter